59r7f z7t87 29b6d b4tei 8br9b 74nz7 bn7th beeyb bfada ef53k b2rsz tkn78 h9kdt ze244 36848 97d4z r5h6i 7k2hh ysf8z 3t4ni sbdr6 New Balance Women's DynaSoft Beaya Brown - $39.99 |

New Balance Women's DynaSoft Beaya Brown - $39.99

2021.11.27 02:12 liftonark New Balance Women's DynaSoft Beaya Brown - $39.99

New Balance Women's DynaSoft Beaya Brown - $39.99 submitted by liftonark to Deals_Shoes [link] [comments]


2021.11.27 02:12 solblood EU ネット政治広告に規制案 選挙介入阻止狙う

submitted by solblood to newsokur [link] [comments]


2021.11.27 02:12 The_watcher_100 What's it like slowly losing consciousness or falling unconscious?

submitted by The_watcher_100 to AskReddit [link] [comments]


2021.11.27 02:12 CrxzyT Question: Weekly snapshot

My understanding is that snapshots of your balance are taken every Friday at 05:00:00 UTC and the interests are calculated based on these snapshots.
Does this mean that if I transfer in some BTC on Tuesday, I will not be earning any interests on the transferred amount until the next snapshot? So effectively the APY for those BTCs are 0% from Tuesday to Friday 04:59:59 UTC?
I'm asking because I mine BTCs everyday so if I'm not earning anything on early transfers, I might as well just wait to transfer once a week to save on tx fees.
submitted by CrxzyT to CelsiusNetwork [link] [comments]


2021.11.27 02:12 amnesiac7 The bottomless self-pity of American conservatives

The bottomless self-pity of American conservatives submitted by amnesiac7 to RepublicanValues [link] [comments]


2021.11.27 02:12 Native_Nod Trying to use a momentary button to either complete or interrupt a circuit, depending on the position of a toggle switch. Does my diagram look functional?

Hey everyone
So Im currently modifying a vintage Yamaha keyboard. I discovered that by connecting 2 points on the circuitboard, I can trigger a persistent click, kind of like a metronome, while the drum machine is on.
I wired this to a simple toggle switch to turn it on and off. Flipping it up and down rapidly works as a sort of “drum fill” function, but its not an ideal solution. The force of flipping the switch on and off is causing wear and tear. So what id like to do is wire a momentary push button in to use instead.
So id still like the toggle switch to turn the clicks on and off. But id also like to have a momentary button that, when held, cues the clicks while the toggle is off, and then mute the clicks while the toggle is on. So as far as I can tell, I need a 3 pin, SPDT momentary push button, as well as a standard ON/ON toggle switch. Heres the diagram I came up with. Ignore the “40k pot” on the right.
Can anyone tell me if this looks functional? I think itll work but im not sure. Im also a bit worried I misunderstood how the SPDT momentrary button works, as ive only used the standard 2 pin “push to make” types in the past.
These are the ones I ordered for this purpose. Am I correct that holding the button will change the connection from NO -> COM to NC -> COM?
Anyway, sorry for the long post, and thanks in advance for any replies. Also my apologies for the terrible drawing lol, i did it on my phone
submitted by Native_Nod to AskElectronics [link] [comments]


2021.11.27 02:12 Houssem_Aouar The Warriors have now scored 100+ points in a game 42 times in a row. The Miami have the next longest streak with 9 games.

Crazy how fluid and reliable their offense has been, especially while having a suffocating defense.
In short, Warriors good.
submitted by Houssem_Aouar to nba [link] [comments]


2021.11.27 02:12 Salt-Ad-5349 Ideas on how to improve siding

Hey all, I just bought an older home with shaker siding. I don't want to completely redo it right now, but i would like to figure out how to make it look nicer. Could you take a look at this picture and leave any suggestions? Specifically, if there's a way to make the siding look more flat or unified?
Additionally, i don't love how the house's skirt extrudes... do you think there's a way to somehow just make it straight and go all the way into the ground without redoing everything?
https://imgur.com/a/DiyMSSY
Thank you!
submitted by Salt-Ad-5349 to HomeImprovement [link] [comments]


2021.11.27 02:12 Myterious-Vee Manifested for my friend through visualization anf meditation channeling❤️

My friend is 7.5weeks pregnant and the baby has still no heartbeat. She asked me to pray for her baby which I did and I visualized daily that the baby inside her tummy gets a heartbeat. 3 days of visualization and I also did meditation channeling twice, i was kind of experimenting on this one. When i meditate I put my awareness in my friend's tummy and I put all my emotions to her as well. But we live in different places. We just talk through text. And it works. Yesterday, she texted me that the baby has finally a heartbeat. Very thankful and so happy. I hope this will inspire somebody today. ❤️❤️❤️❤️❤️❤️❤️❤️
submitted by Myterious-Vee to lawofattraction [link] [comments]


2021.11.27 02:12 forced_memes a swiftie has taken over my local pool

so i’ve been trying to get in shape recently so i’ve been swimming a lot. however recently a disproportionate amount of taylor swift has been playing on the speakers for the pool. should i figure out which lifeguard it is who’s playing taylor swift on aux and get them fired somehow or should i just stop swimming
submitted by forced_memes to popheadscirclejerk [link] [comments]


2021.11.27 02:12 thisisAndrew09 This is Dierdre Wolownick. She's 70 years old. She just became the oldest person to climb Yosemite's El Capitan mountain. It's widely regarded as one of the most difficult rock climbing challenges. She did it all in just 13 hours.

This is Dierdre Wolownick. She's 70 years old. She just became the oldest person to climb Yosemite's El Capitan mountain. It's widely regarded as one of the most difficult rock climbing challenges. She did it all in just 13 hours. submitted by thisisAndrew09 to wholesome [link] [comments]


2021.11.27 02:12 AK_Windsock LF: Piplup or Lotad

Looking for someone willing to trade me a Piplup or a Lotad, preferably below level 35.
submitted by AK_Windsock to pokemontrades [link] [comments]


2021.11.27 02:12 kagankaratas 🥺🤩

🥺🤩 submitted by kagankaratas to aww [link] [comments]


2021.11.27 02:12 tezkicenter Pls give this guy more minutes. Dislocated finger and still managed to put 10 pts, 4 ast

Pls give this guy more minutes. Dislocated finger and still managed to put 10 pts, 4 ast submitted by tezkicenter to denvernuggets [link] [comments]


2021.11.27 02:12 GingeryGing10 How do I play my friend on campus legends

submitted by GingeryGing10 to Madden [link] [comments]


2021.11.27 02:12 ContentDistribute4F I’m selling her mega for $1 but pls read my bio

submitted by ContentDistribute4F to JhonniBlaze_ [link] [comments]


2021.11.27 02:12 axolotl69696969 Serial Designation N as an SCP

Item #: 7563-j-1
Object class: Euclid

Special Containment Procedures:
SCP-7563-j-1 is to be in a titanium room with bullet proof glass watching in on it. the Object must be given fresh oil daily to avoid it from overheating. it is to be looked at weekly for any damages in the cell and for any damages on the Object. Personnel with level 3 or higher clearance can enter the room with two armed guards watching.four guards are to be stationed outside the room and switched out monthly.if it goes into attack mode all personnel are to leave the area and an mtf is to be deployed to restrain it. the object is not allowed to interact with any other 7563-j instances.its tail is to be kept taped to its back. it is not to be in direct sunlight or any high level sunlight any light is too be low-level.

Description:
SCP-7563-j is a sentient robot made of [DATA EXPUNGED].it calls itself serial designation N. its head has a screen which displays 2 eyes that are yellow colored. it always wear a coat (even though we have yet to find out why).like other instances it has five yellow light on its head and has a tail with a stinger on it.unlike other instances this one is very cooperative and doesn't argue often with personnel.it seems to always get the job done. it doesn't get along with any other instances at all. it stands at 3 feet and 5 inches.
Found on planet [REDACTED] with another robot. it was contained without incident.
Like every other instance when it sees potential prey it will show a big X on the screen instead of a eyes,show sharp metal teeth, and extend long metal wings similar to SCP-070. this has been designated attack mode.
like all instances this one has an arsenal of weapons. currently we have found these weapons on it:
Stinger: the end of its tail is where it's located. it holds a strong chemical that is capable of melting most metals.
Blades: they are located in the fingers. the blades extend and retract when needed.they are extremely sharp.
Arm cannon: it is located on either arm depending on where the object wants it to be. it fires missiles out.
Gatling gun: located on any hand. it fires regular bullets out, it is unknown how much ammo it has.
Laser: located on any hand. it fires a thin laser which cuts through most objects.
The instance's saliva is capable of neutralizing the chemical produced by the stinger and "healing" anything the chemical it has melted. it has also been discovered that the saliva also has the same effect on other corroding liquids like scp-106's corrosion and scp-035's liquids. it also may be used help deal with anomalies that produce corrosive liquids in the future.
It also has very fast regenerative properties, making it able to rebuild itself after most of it's body is destroyed.
When it is low on oil or is in direct sunlight it will overheat, so oil is provided to prevent this as it is unknown what will happen if it doesn't have oil.
submitted by axolotl69696969 to MurderDrones [link] [comments]


2021.11.27 02:12 Inevitable_Ad5972 my worst enemy...... longshots

my worst enemy...... longshots submitted by Inevitable_Ad5972 to CODMobile_Loadouts [link] [comments]


2021.11.27 02:12 Lbeantree 100,000 Iranian women march against the Hijab Law, Tehran 1979

100,000 Iranian women march against the Hijab Law, Tehran 1979 submitted by Lbeantree to SocietyGuruPhotos [link] [comments]


2021.11.27 02:12 Amethyst_Ninjapaws Went from MS-7778 MB to MSI Z590 Gaming Carbon Wifi MB and can't get OS to load. Help?

I've built a new gaming PC with the following specs:

My previous HDD was failing, and I wanted to make sure that my new computer would be able to boot and load up an OS after I got all of the parts put together. So, I put the Samsung SSD in my old computer and installed Windows 8.1 on it (because that is the OS my PC was running when the HDD failed). It installed from a USB flash drive with the ISO file on it (that I had created using Rufus), and rebooted perfectly. I was able to log in without any issues.
The specs for my previous PC (that the SSD was installed into) were as follows:
I honestly don't know what configuration the MB was using, but the most recent BIOS update it had received was dated 2014.
I got everything for the new build put together and plugged in, and it started up beautifully. All of the lights and fans were working, I had a display, but it would only allow me to enter the BIOS, and wouldn't load the OS. So, I tried M-Flashing the BIOS, and, while it was able to update properly, it still wouldn't load the OS. So, I decided to try reinstalling Windows 8.1 on the SSD while it was connected to the new MB, since at that point I learned that there may be some sort of disconnect between the OS and the MB since when the OS was installed the SSD was attached to a different MB.
But. While the ISO file I made allowed me to install Windows 8.1 without entering the product key the first time, it didn't allow me to do that when I attempted to reinstall it while it was connected to the new MB. And I have tried, and failed, to recover the product key for my copy of windows 8.1.
What I am trying to do now is install Windows 10 on the SSD, because I have a spare code for that OS that I can transfer to this new build. I used Microsoft's Windows download tool to create the ISO file on the same thumb drive that I used for the 8.1 install, plugged it into the same port on the case for the new build, and started the computer.
Well, now I don't have a display at all.
The only thing that changed was the files stored on the thumb drive, and I don't know how that would affect whether or not I end up with a working display.
Any idea why I suddenly lost my display, or what I might be able to do to get the OS on the SSD to load?
The biggest problem is just not being able to get the OS to load up. The lack of display is a secondary problem. Because when I remove the USB thumb drive with the Windows 10 ISO file on it, and start up the computer, I have a display again.
submitted by Amethyst_Ninjapaws to buildapc [link] [comments]


2021.11.27 02:12 tugfaxd55 Good hidden gems on GFN?

Hi there. I'm trying to get some good games on this sale that I can also play on GFN. Specially, I would love an Indie game or an Stealth game. Lately I had a good time playing Styx: Shard of Darkness which is avaible in the service.
submitted by tugfaxd55 to GeForceNOW [link] [comments]


2021.11.27 02:12 Slow_Driver_drives55 Blinker and High Beams

submitted by Slow_Driver_drives55 to MechanicAdvice [link] [comments]


2021.11.27 02:12 HunterRBiden Those who do not work should die? 😵

Those who do not work should die? 😵 submitted by HunterRBiden to antiwork [link] [comments]


2021.11.27 02:12 snookers1111 How much weight would I lose on my diet.

I’m just looking for a ball park figure. I don’t want a miracle to happen nor expect fast results, but I do want results and at the moment I am loving what I’m doing (it’s been two weeks) as I’m finding it easy.
I’m on my weight loss journey and have been consuming dishes for dinner that mainly consist of white or jasmine rice. I usually pair it with steamed veggies, chicken and sauces like satay or honey soy. I only have one serving and it does full me up. It’s usually a full plate portion and as I’m on omad this is also my only meal of the day. I also only drink water, mainly 4- 6 bottles a day and don’t consume dairy (I’m lactose intolerant).
For exercise I do growwithjo 5 times a week depending on my work schedule and also walk almost every day when possible.
Thanks in advance.
submitted by snookers1111 to WeightLossAdvice [link] [comments]


2021.11.27 02:12 MaintenanceKey5200 Singer Tiffany struggles through her hit 80s song "I Think We're Alone Now" and yells at fans. Children behave.

Singer Tiffany struggles through her hit 80s song submitted by MaintenanceKey5200 to PublicFreakout [link] [comments]


http://nekusaka.ru